BMP focus on quality is always a top priority, and it is one of the things that has allowed us to become one of the world leaders in the industry in which we operate: that’s why our products have certifications. With this in mind, we are constantly updating ourselves on the regulations that govern our products and everything related to them. All our industrial locks and doors fully comply with industry regulations and, as detailed in this link, offer transparency and protection for our customers.

Certification: European level

Machinery Directive 2006/42 / EC

The Machinery Directive 2006/42 / EC was introduced on 9 June 2006 and came into force from 29 December 2009 throughout the European Union, replacing the previous Machinery Directive 98/37 / EC. This standard forms part of the Machinery Directives (MD): a set of standards defined at Community level for machine manufacturers, with the aim of defining the minimum essential safety and health requirements in the field of machine design and construction. The ultimate objective is to improve the safety of products placed on the EU market. The CE marking represents one of the certificates of conformity to the standard in question.

Certifications EN 12453 / CE

The European standard EN 12453 / CE “Industrial, commercial and garage doors and gates. – Safety in the use of electric doors. – Requirements / Industrial, commercial and garage doors and gates. – Safety in the use of motorized doors. Requirements”. This standard specifies performance requirements for safety in the use of all types of doors, gates and motorized barriers, intended for installation in human contact environments, whose primary use is to provide secure access to goods and vehicles accompanied or guided by people in industrial, commercial or residential environments.

Certifications EN 12445 / EC

The European standard EN 12445 / EC “Industrial, commercial and garage doors and gates. Safety in the use of electric doors. Test methods / Industrial, commercial and garage doors and gates. Safety of use of motorized doors. Test methods”. The document specifies the measurement methods to be applied to motorized doors to demonstrate compliance with the requirements set out in EN 12453 / CE. In particular, it specifies how to measure the forces developed by a motorized door. In fact, mechanical safety problems are closely related to the dangerousness of moving parts and therefore to the crushing force generated by the engine. The purpose of the rule in question is to illustrate in detail, depending on the type of closure, the various tests required to ensure that the forces applied do not exceed the established limits.

European standard UNI EN 13241-1 / CE

The European standard UNI EN 13241-1 / CE, “Industrial, commercial and garage doors and gates. – Product standards / Industrial, commercial and garage doors and gates. The product standard” will enter into force on 1 May 2005. It contributes jointly to the text described above, to achieve the CE marking, granted by a certification institute specifically notified by the Ministry of Productive Activities.
The legislation specifies requirements related to the performance and safety of doors, gates, closures and barriers that are installed in areas frequented by pedestrians and whose main use relates to the safe access of goods and vehicles to industrial areas, commercial or residential.

UNI points: how to consult EN standards

European EN standards are applied in Italy through the Italian Normazione UNI. All of the above policies are for sale through the entity’s e-commerce site. However, it is possible to consult free of charge the texts in specific points UNI instituted by the organization. Below is the list and references of all national centres.

c/o Confartigianato Asti
Piazza Cattedrale 2, 14100 Asti – Tel. 01415962
Email
[email protected]
Internet
www.confartigianatoasti.com

c/o Centro Consorzi
Via Gresal, 5/e – 32036 Sedico (BL) – Tel. 0437851311 e 0437851370 – Fax 0437851399
Email
[email protected]
Internet
www.centroconsorzi.it

c/o Polo Tecnologico di Bergamo
via Pasubio, 5 – 24044 Dalmine (BG) – Tel. 0356224011 – Fax 0356224002
Email
[email protected]
Internet
www.bergamosviluppo.it

c/o Confartigianato Associazione Artigiani e Piccole Imprese della Provincia di Biella
Via Galimberti, 22 – 13900 Biella (BI) – Tel. 0158551711 – Fax 0158551722
Email
[email protected]

c/o CCIAA – Camera di Commercio Industria Artigianato e Agricoltura
Palazzo Affari – Sportello Sicurezza Prodotto
Piazza Costituzione, 8 – 40128 Bologna (BO) – Tel. 0516093856-858
Email
[email protected]
Internet
www.bo.camcom.gov.it

c/o TIS techno innovation Altoadige Scpa
Via Siemens, 19 – 39100 Bolzano – Tel. 0471068142 (dal 1° agosto: 0471068144) – Fax 0471068100
Email
[email protected]
Internet
www.tis.bz.it

c/o Confartigianato Imprese Cuneo
Via I° Maggio, 8 – 12100 Cuneo – Tel.0171451111 – Fax 0171697453
Email
[email protected]
Internet
cuneo.confartigianato.it

c/o Meccano S.c.p.a.
Via G. Ceresani,1 – 60044 Fabriano (AN) – Tel. 0732626511 – Fax 0732626939
Email
[email protected]

c/o Associazione Industriali Provincia di Firenze
Via Valfonda, 9 – 50123 Firenze – Tel. 0552707206 – Fax 0552707204
Email
[email protected]
Internet
www.confindustriafirenze.it

c/o C.I.S.E.
C.so della Repubblica, 5 (3° piano) – 47121 Forlì Tel. 054338216 – Fax. 054338266
Email
[email protected]
Internet
www.ciseonweb.it

c/o Confindustria Lecco
Via Caprera 4, 23900 Lecco – Tel. 0341477244 – Fax 0341 477239
Email
[email protected]
Internet
www.confindustria.lecco.it

c/0 UNI Milano
Via Sannio, 2 – 20137 Milano – Tel. 0270024200 – Fax 025515256
Email
[email protected]
Internet
www.uni.com
(consultazione e vendita diretta)

c/o PROMEC Azienda Speciale della CCIAA di Modena
Via Ganaceto, 113 – 41100 Modena – Tel. 059208.888
Email
[email protected]
Internet
www.mo.camcom.it/

c/o Collegio dei Periti Industriali e dei Periti Industriali Laureati della Provincia di Monza e della Brianza
Via Aliprandi, 13 – 20900 Monza- Tel. 039388849 – Fax 0393902072
Email
[email protected]
Internet
www.periti-industriali.monza.it

c/o Consorzio Promos Ricerche
Via Sant’Aspreno, 2 – 80133 Napoli – Tel. 0814109140 – Fax 0815520181
Email
[email protected]
Internet
www.promosricerche.org

c/o Parco Scientifico e Tecnologico Galileo
Corso Stati Uniti 14 bis – 35127 Padova – Tel. 0498061111
Email
[email protected]

c/o COSMOB S.p.A.
Via della Produzione, 61 – 61025 Montelabbate (PU) – Tel. 0721481269 – Fax 0721482512
Email
[email protected]

c/o CNA Pistoia
Via E. Fermi 2 (Zona Industriale Sant’Agostino) – 51100 Pistoia – Tel. 0573921428 – Fax 0573539504
Email
[email protected]

c/o CNA Ragusa
Via Psaumida 38 – 97100 Ragusa – Tel. 0932663167 – Fax 0932683151
Email
[email protected]

c/o Azienda Speciale SIDI Eurosportello della Camera di Commercio di Ravenna
Via Roma 89 – 48100 Ravenna – Tel. 0544481463
Email
[email protected]
Internet
www.ra.camcom.it

c/o UNI Roma
Via delle Colonnelle, 18 / Via del Collegio Capranica 4 – 00186 Roma – Tel. 0669923074 – Fax 066991604
Email
[email protected]
Internet
www.uni.com
(consultazione e vendita diretta)

c/o Collegio dei Periti Industriali e dei periti Industriali Laureati per le Province di Sassari e Olbia
Via Olbia, 3 – 07100 Sassari – Tel. 079239003
Email
[email protected]
Internet
www.peritindustriali.sassari.it

c/o Confartigianato Imprese Sondrio
Largo dell’Artigiano, 1 – 23100 Sondrio – Tel. 0342514343 – Fax 0342514316
Email
[email protected]
Internet
www.artigiani.sondrio.it

c/o Camera di Commercio di Torino
via Giolitti 26 – 10123 Torino – Tel. 0115714717-4718 – Fax 0115714720
Email
[email protected]
Internet
www.to.camcom.it

c/o Treviso Tecnologia
Palazzo Cristallo, Via Roma, 4/d – 31020 Lancenigo di Villorba – Tel. 04221742100 (int. 2) – Fax 0422608866
Email
[email protected]
Internet
www.tvtecnologia.it