DynamicRoll B-Drive SP – Technical Data Sheet

BMP Europe / Technical Data Sheets

BMP DynamicRoll B-Drive SP is a self-repairing industrial high-speed door equipped with the motor-driven Push & Pull opening and closing system. The design uses a polyethylene coiling spiral to collect the PVC curtain with reduced friction.

Unlike gravity-fed high-speed doors, the B-Drive SP uses motor-driven movement for both opening and closing. Its patented zip-guide system allows the curtain to recover at the point where it leaves the guides after an impact.

This page presents the specifications published in the DynamicRoll B-Drive SP Lite technical data sheet, including door performance, wind resistance, safety systems, PVC materials, transparent windows and accessories.

Product Overview

Motor-driven self-repairing door with Push & Pull technology.

The B-Drive SP features a motor-driven opening and closing system, a special polyethylene coiling spiral and a patented high-density Polyzene/polyethylene zip-guide. The zip is designed to limit twisting and jamming during movement and after impact. The V-shaped upper curtain profile supports controlled coiling in the guide system.

Technical Specifications

Published performance and construction data from the official Lite data sheet.

Maximum opening dimensions W 4,000 mm × H 4,000 mm; other sizes on request
Maximum speed Up to 3 m/s
Wind resistance Class 5 for openings below 5,000 mm, as stated in the manufacturer's data sheet. Higher wind resistance available on request
Operation with wind load Up to 100 km/h
Frame Galvanized steel, stainless steel or powder-coated steel
Curtain options 1,300 g/m² PVC, 12 × 12; 1,700 g/m² insulated curtain; antistatic option
Transparent windows Anti-UV transparent PVC, 1 mm, as listed in the general specification
Vertical guides Galvanized steel frame with Polyzene sliding guides; 1,000,000 cycles stated
Motor Direct drive with worm gearboxes
Safety system Infrared light curtain H2500, CE EN 13241
Electrical supply Three-phase 230 / 380 / 500 V, 50/60 Hz
Self-repair At the point where the curtain exits the guide
Working temperature -30°C to +70°C, with the manufacturer's footnote referring to a heating cable
Standard sound insulation 18 dB; value depends on frequency
Water resistance Class 3, reference EN 12425
Air permeability Class 1
Thermal transmission Standard: 5.8 W/m²K; insulated: 3.2 W/m²K

Push & Pull Drive System

Motor-driven curtain movement and integrated self-repair.

  • Motor-driven opening and closing, rather than gravity-fed movement
  • Polyethylene coiling spiral designed to reduce friction during curtain collection
  • Patented zip-guide system for recovery at the point of impact
  • V-shaped upper curtain profile designed for controlled coiling

PVC Curtain Characteristics

Standard and insulated PVC specifications reported in the Lite data sheet.

Standard PVC external side Opaque PVC, 0.7 mm; 18 standard colours
Standard PVC internal side Rough PVC, 0.2 mm; 18 standard colours
Standard fabric PES, one fabric layer, 1100 Dtex, 12 × 12
Standard PVC tested thickness 0.9 ± 0.1 mm, ISO 2286-3
Standard PVC weight in material table 900 g/m²; 0.90 ± 0.1 kg/m², ISO 2286-2
Insulated PVC external side Straight-finish PVC, 0.5 mm; six standard colours
Insulated PVC internal side Sponge PVC, 7 mm; six standard colours
Insulated PVC tested thickness 7.0 ± 0.1 mm, ISO 2286-3
Insulated PVC weight in material table 1,350 g/m²; 1.7 ± 0.1 kg/m², ISO 2286-2

The manufacturer's general specification reports 1,300 g/m² for the standard curtain and 1,700 g/m² for the insulated curtain. The PVC characteristics section also includes 900 g/m² and 1,350 g/m² values respectively. Confirm which figures apply to the selected complete curtain assembly before technical specification.

Transparent Window Characteristics

Superclear PVC characteristics published in the Lite data sheet.

Material PVC Superclear 0.75 mm FR
Thickness 0.75 mm
Total PVC weight 940 g/m²
Light transmission 87.5%, JIS K 7361
Temperature limitation Suitable only for positive-temperature environments

The general technical table lists 1 mm anti-UV transparent PVC windows, while the separate Superclear material section specifies a 0.75 mm sheet. Check the selected window material and configuration before specifying thickness or temperature suitability.

Optional Accessories

Opening devices, sensors and traffic control equipment.

  • TOF/Spot opening point radar for internal use
  • Infrared radar for cross-movement, motion and presence detection
  • Fixed red and green traffic lights, LED countdown lights and traffic-light barriers
  • Green/black opening buttons, freeze-stop and no-touch controls
  • Dual-function traffic-light button for opening and closing signals
  • Wind gauge, key selector, remote control and B-Protect bollard
  • Pull-cord switch and magnetic loop detector

Technical Documentation

Access the public DynamicRoll B-Drive SP Lite technical data sheet or request the complete product documentation.

Public Documentation

The Lite PDF includes published performance, wind resistance, construction details, Push & Pull technology, PVC and window specifications and optional accessories.

Download Lite Technical Data Sheet (PDF)

Need More Detailed Technical Information?

The complete BMP DynamicRoll B-Drive SP technical data sheet is available through the official product download request form. Complete the form to access the full documentation.

Request Complete Technical Data Sheet